Riso EZ Series User Manual page 111

REG-LL_EN.book Page 111 Wednesday, September 14, 2011 12:03 PM
Use the following procedure to enter necessary information.
1
Enter a parameter using the Print
Quantity keys.
The parameters that can be entered differ among
the consumables.
When the indicator [*2] is off and Error Type indicator [*4] lights
When an Error Type indicator lights, please refer to the following pages.
Error Type
2
Error No.
d-04
d-17
If an Error No. "d-xx" other than above is displayed,
please refer to the reference pages.
-
-
Press the key to complete the setting.
If the next H No. appears, repeat steps 1 and 2.
Note:
• When necessary entry is completed, the Print
Quantity Display restores the normal status and
is available for usual operations.
Reference page
p.107
p.108
p.107~ p.108
p.90
p.88
Check & Error Display
Troubleshooting
111