Riso KZ30 User Manual
  1. Manuals
  2. Brands
  3. Riso Manuals
  4. Printer
  5. KZ30
  6. User manual

Riso KZ30 User Manual

Printing machine
Hide thumbs
Table of Contents

Advertisement

Quick Links

KZ30_UG.book Page 1 Monday, December 21, 2009 11:11 AM
Riso shall not be responsible for any damage or expense that might result from the use of
this manual.
Riso shall not be liable for any direct, incidental, or consequential damages of any nature,
or losses or expenses resulting from the use of this product or included manuals.
Riso shall not be responsible for any damage or expense that might result from the use of
information contained in this manual.
B
Caution:
• Make sure to read the important operational safety information.
• Store this manual close-by, and fully acquaint yourself with the printing machine.
is a registered trademark of RISO KAGAKU CORPORATION in Japan and other
countries.
is a trademark of RISO KAGAKU CORPORATION.
• As we are constantly improving our products, the machine may differ in some respects
from the illustrations used in this manual.
• The information contained in this document is subject to change without notice.
is a trademark of RISO KAGAKU CORPORATION.
Copyright © 2010 RISO KAGAKU CORPORATION
1

Advertisement

Table of Contents
loading

Related Manuals for Riso KZ30

Summary of Contents for Riso KZ30

  • Page 1 KZ30_UG.book Page 1 Monday, December 21, 2009 11:11 AM Riso shall not be responsible for any damage or expense that might result from the use of this manual. Riso shall not be liable for any direct, incidental, or consequential damages of any nature, or losses or expenses resulting from the use of this product or included manuals.

  • Page 2: Table Of Contents

    KZ30_UG.book Page 2 Monday, December 21, 2009 11:11 AM Contents Contents Welcome to the RISO KZ30 ....................5 About the notations in the explanatory note .................5 Before Starting to Use Safety Guide - Installation ....................6 Installation ..........................6 Power connection .........................6 Safety Guide - Handling and Operation................
  • Page 3 KZ30_UG.book Page 3 Monday, December 21, 2009 11:11 AM Contents Functions for Master-Making Selecting the Image Processing Mode [Line/Photo/Duo]........................ 26 Scanning Originals Written with Pencils [Pencil] ............... 27 Enlarging or Reducing Originals by Standard Ratios [Enlargement/Reduction]....28 Scanning Originals Having Faint or Dark Contents [Scanning Level Adjustment] .... 29 Printing Originals Side-by-Side [2-Up Printing]..............
  • Page 4 KZ30_UG.book Page 4 Monday, December 21, 2009 11:11 AM Contents Maintenance Safety Guide - Cleaning ....................58 Cleaning ..........................58 Thermal Print Head ......................58 Scanner Glass and White Sheet of the DF Unit ..............60 Pressure Roller ........................61 The Exterior ........................62 Troubleshooting Check &...

  • Page 5: Welcome To The Riso Kz30

    KZ30_UG.book Page 5 Monday, December 21, 2009 11:11 AM Welcome to the RISO KZ30 Thank you for purchasing this printing machine that produces clear prints with easy key operations. Besides many useful functions as a printer, the machine provides you with various conveniences.

  • Page 6: Before Starting To Use

    KZ30_UG.book Page 6 Monday, December 21, 2009 11:11 AM Before Starting to Use Safety Guide - Installation This section describes precautions to be observed when installing the machine. Read this section before installing the machine. Note: • Your dealer will help you to determine a proper location for the machine at the time of delivery. Installation WARNING: •...

  • Page 7: Safety Guide - Handling And Operation

    KZ30_UG.book Page 7 Monday, December 21, 2009 11:11 AM Before Starting to Use Safety Guide - Handling and Operation This section describes the precautions to be observed and the information the user should be aware of when oper- ating the machine. Operating environments Important!: •...

  • Page 8: Consumables

    Before Starting to Use Consumables Important!: • For ink and Master Roll, it is recommended to use the products specified by RISO. • Store the consumables such as paper, Master Roll and ink properly. Do not store consumables in the following places: –...

  • Page 9: Connection With A Computer (Option)

    Connection with a Computer (Option) With an optional interface card (RISO PC Interface Card USB 2.0) installed, you can directly send data from a con- nected computer to the machine as an original for printing. Because digital data itself is used for making a master, the finish of prints becomes outstanding.

  • Page 10: Paper Recommendations

    KZ30_UG.book Page 10 Monday, December 21, 2009 11:11 AM Before Starting to Use Paper Recommendations Size and Weight Restrictions The table shows the specifications of usable print paper. Usable Printing Paper Unit Size Weight 182 mm × 257 mm to 297 mm × 420 mm 50 g/m to 128 g/m "...

  • Page 11: Tips For Better Paper Feeding

    KZ30_UG.book Page 11 Monday, December 21, 2009 11:11 AM Before Starting to Use Tips for Better Paper Feeding To prevent paper jams and misfeeds, follow the directions below: • Set the Paper Feed Pressure Adjustment Lever to the position according to the thickness of the printing paper. ( p.20) Standard paper: Standard position 1 ( 1), Standard position 2 (...

  • Page 12: Originals

    KZ30_UG.book Page 12 Monday, December 21, 2009 11:11 AM Before Starting to Use Originals Size and Weight Restrictions Usable originals are as follows. Unit Size Weight 182 mm × 257 mm to 257 mm × 364 mm 50 g/m to 107 g/m "...

  • Page 13: Materials Not To Be Printed

    KZ30_UG.book Page 13 Monday, December 21, 2009 11:11 AM Before Starting to Use Important!: • A 10 mm ( ") margin on the top side cannot be read when a master is made. If any letter is placed in the margin, a master cannot be made.

  • Page 14: Getting Acquainted

    KZ30_UG.book Page 14 Monday, December 21, 2009 11:11 AM Before Starting to Use Getting Acquainted Function and Name of Each Part Original Tray ( p.20) Feed Tray Paper Guide Lock Lever ( p.20) Place an original face down. Locks the Feed Tray Paper Guides. DF Unit Feed Tray Lock Lever ( p.20) Feeds the original from the Original Tray to the Scanner.
  • Page 15 KZ30_UG.book Page 15 Monday, December 21, 2009 11:11 AM Before Starting to Use Print Drum (Cylinder) ( p.61) Power Switch ( p.23) Turns the machine power ON or OFF. Ink Cartridge Holder Print Drum (Cylinder) Lever ( p.50) Separation Fan Pull out the Print Drum (Cylinder) by holding this lever.

  • Page 16: Control Panel

    KZ30_UG.book Page 16 Monday, December 21, 2009 11:11 AM Before Starting to Use Control Panel Check & Error Display ( p.64) Reset Key Indicates error locations and status. Returns all settings to the initial settings. Energy Saving Indicator Lights when the machine is in the Sleep (energy saving) Use when setting up for programed printing or when Mode.
  • Page 17 KZ30_UG.book Page 17 Monday, December 21, 2009 11:11 AM Before Starting to Use Reproduction Size Selection Key ( p.28) Interface Key/Indicator ( p.24) When selecting from among the standard reproduction Selects the Online or Offline mode when interfaced with sizes, press to switch the selection.

  • Page 18: Basic Process

    KZ30_UG.book Page 18 Monday, December 21, 2009 11:11 AM Before Starting to Use Basic Process The machine presents the following two basic operational processes: • Master-making process: to make a master by scanning an original (Master-Making mode) • Printing process: to actually print the master data on paper (Printing mode) Process for printing from a paper document A placed original is scanned by the scanner, and a generated master is rolled around the Print Drum (Cylinder).
  • Page 19 KZ30_UG.book Page 19 Monday, December 21, 2009 11:11 AM Before Starting to Use Basic Process...

  • Page 20: Basic Operations

    KZ30_UG.book Page 20 Monday, December 21, 2009 11:11 AM Basic Operations Preparing to Print Setting the Original Tray Open the Original Tray to the outer side. Setting up the Paper Feed Tray and Loading Paper Lower the Feed Tray Lock Lever to Fit the “left”...

  • Page 21: Adding Or Replacing Paper

    KZ30_UG.book Page 21 Monday, December 21, 2009 11:11 AM Basic Operations Adding or Replacing Paper Note: • When using custom-sized paper, load the paper so that its center comes to the center of When you add paper or replace with paper of a different the Paper Feed Tray, and fit the Feed Tray size at the time of printing, press the Feed Tray Lock Paper Guides to the sides of paper.

  • Page 22: Setting Up The Paper Receiving Tray

    KZ30_UG.book Page 22 Monday, December 21, 2009 11:11 AM Basic Operations Setting up the Paper Receiving Tray Position the Receiving Tray Paper B4(Legal) and larger paper Guides and Paper Stopper. Align the Paper Jump Wing with the outer side. (So that A3/B4 is below the setscrew.) Hold the lower parts of the Receiving Tray Paper Guides and slide them according to the scale on the Paper Receiving Tray.

  • Page 23: Printing From A Paper Document

    KZ30_UG.book Page 23 Monday, December 21, 2009 11:11 AM Basic Operations Printing from a Paper Document Turn the power switch to (ON). Enter the number of pages to be printed, using the Print Quantity The power switch is located on the far right side of keys.

  • Page 24: Printing Data You Have Created On A Computer (Optional Kit Required)

    KZ30_UG.book Page 24 Monday, December 21, 2009 11:11 AM Basic Operations Printing Data You Have Created on a Computer (Optional Kit Required) Turn the power switch to (ON). Lightning of Description Indicator The power switch is located on the far right side of the machine.
  • Page 25 KZ30_UG.book Page 25 Monday, December 21, 2009 11:11 AM Basic Operations Printing Data You Have Created on a Computer (Optional Kit Required)

  • Page 26: Functions For Master-Making

    KZ30_UG.book Page 26 Monday, December 21, 2009 11:11 AM Functions for Master-Making Selecting the Image Processing Mode [Line/Photo/Duo] In order to make a quality master, select an appropriate mode depending on whether originals contain only Line (text), photos, or both of them. Press the key to select the Image Important!:...

  • Page 27: Scanning Originals Written With Pencils [Pencil]

    KZ30_UG.book Page 27 Monday, December 21, 2009 11:11 AM Functions for Master-Making Scanning Originals Written with Pencils [Pencil] This function allows clearer printing from such originals containing faint contents such as those written with pencils. Press the key to turn on its indicator. Important!: •...

  • Page 28: Enlarging Or Reducing Originals By Standard Ratios [Enlargement/Reduction]

    KZ30_UG.book Page 28 Monday, December 21, 2009 11:11 AM Functions for Master-Making Enlarging or Reducing Originals by Standard Ratios [Enlargement/Reduction] You can enlarge or reduce originals when making a master. Specify the standard ratio to enlarge or reduce an original. Press the key to specify the Tip:...

  • Page 29: Scanning Originals Having Faint Or Dark Contents [Scanning Level Adjustment]

    KZ30_UG.book Page 29 Monday, December 21, 2009 11:11 AM Functions for Master-Making Scanning Originals Having Faint or Dark Contents [Scanning Level Adjustment] You can adjust the scanning level according to the density of text and images on originals. With “Auto” selected, the density of originals is pre-scanned and the optimum scanning level is automatically set. Manual adjustment allows you to select from five levels.

  • Page 30: Printing Originals Side-By-Side [2-Up Printing]

    KZ30_UG.book Page 30 Monday, December 21, 2009 11:11 AM Functions for Master-Making Printing Originals Side-by-Side [2-Up Printing] The same or different originals can be printed side by side. This is called 2-Up Printing. 2-Up Printing is divided between “Single-original printing” and “Two-original printing”. Important!: •...

  • Page 31: Restrictions On 2-Up Printing

    KZ30_UG.book Page 31 Monday, December 21, 2009 11:11 AM Functions for Master-Making Restrictions on 2-Up Printing 2-Up printing restricts the sizes of paper to be used, paper orientations, and the enlargement / reduction ratios. Enlargement / reduction ratio The table shows enlargement / reduction ratios suitable for 2-Up printing. Original 100% Print Paper...

  • Page 32: Operational Procedure

    KZ30_UG.book Page 32 Monday, December 21, 2009 11:11 AM Functions for Master-Making Operational Procedure Place an original. Enter the number of pages to be printed, using the Print Quantity Place an original on the Original Tray. keys. Press the key to turn on its indica- Check the quality of proof copy.

  • Page 33: Automatic Printing [Auto-Process]

    KZ30_UG.book Page 33 Monday, December 21, 2009 11:11 AM Functions for Master-Making Automatic Printing [Auto-Process] Master-making and printing can be performed automatically in sequence. When “Auto-Process” is selected, simply enter number of copies to print, then press the key. Press the key to turn on its indica- tor.

  • Page 34: Functions For Printing

    KZ30_UG.book Page 34 Monday, December 21, 2009 11:11 AM Functions for Printing Producing Proof Copies [Proof] After adjusting the print position and density, you can produce proof copies to check the print quality. Press the key. Proof copy does not affect the number shown on the Print Quantity Display.

  • Page 35: Adjusting The Print Position [Print Position Adjustment]

    KZ30_UG.book Page 35 Monday, December 21, 2009 11:11 AM Functions for Printing Adjusting the Print Position [Print Position Adjustment] You can adjust the print position in the vertical direction using the Print Position Adjustment keys. Also, you can adjust it in the horizontal direction by sliding the Feed Tray Paper Guides. Adjustment range Vertical direction: ±10 mm (±...

  • Page 36: Changing The Print Speed [Print Speed Adjustment]

    KZ30_UG.book Page 36 Monday, December 21, 2009 11:11 AM Functions for Printing Changing the Print Speed [Print Speed Adjustment] You can adjust the print speed to one of two levels; 60 pages per minute or 90 pages per minute. Press the key to adjust the print speed.
  • Page 37 KZ30_UG.book Page 37 Monday, December 21, 2009 11:11 AM Functions for Printing Changing the Print Speed [Print Speed Adjustment]...

  • Page 38: Advanced Features

    KZ30_UG.book Page 38 Monday, December 21, 2009 11:11 AM Advanced Features Automatic Sorting into Groups [Program] “Program” features printing into multiple groups of sets from a single original document. A maximum of 50 groups can be created, each having up to 99 sets. Each group can be up to 9999 pages. The machine can be configured to specify how many pages (sheets) per set, then how many sets are to be created for each group.

  • Page 39: Setting Up For Programed Printing (When Printing Without Registering)

    KZ30_UG.book Page 39 Monday, December 21, 2009 11:11 AM Advanced Features Setting Up for Programed Printing (When Printing Without Registering) Press the key to turn on its indicator. Press the key. [P-a] appears on the Print Quantity Display. The number of set entry mode is started. Note: •...
  • Page 40 KZ30_UG.book Page 40 Monday, December 21, 2009 11:11 AM Advanced Features Press the Master-Making / Print Change over key. The machine switches into the master-making mode. Make necessary settings. Make various settings as necessary. You can set the following functions: •...

  • Page 41: Saving Programs

    KZ30_UG.book Page 41 Monday, December 21, 2009 11:11 AM Advanced Features Saving Programs If you have stored the frequently-used program settings in memory, you can retrieve them for later printing. Six programs can be stored. Set the program. Press the key.

  • Page 42: Retrieving A Program

    KZ30_UG.book Page 42 Monday, December 21, 2009 11:11 AM Advanced Features Retrieving a Program Stored programs can be retrieved for printing. Press the key to turn on its indica- Enter program number using the tor. Print Quantity keys. The registered program is retrieved. Note: •...

  • Page 43: Making Changes To Stored Programs

    KZ30_UG.book Page 43 Monday, December 21, 2009 11:11 AM Advanced Features Making Changes to Stored Programs Modifying its settings. Retrieve a program to modify. Store a program. Follow steps 1 through 3 in “Retrieving a Program” Changed program settings are stored. ( p.42) To overwrite the retrieved program, press the key again.

  • Page 44: Clearing Programs

    KZ30_UG.book Page 44 Monday, December 21, 2009 11:11 AM Advanced Features Clearing Programs Press the key to turn on its indica- Press the key. tor. "a" blinks in the print quantity display. Important!: Note: • Press the key to cancel clearing of program. •...

  • Page 45: Protecting Confidential Documents [Confidential]

    KZ30_UG.book Page 45 Monday, December 21, 2009 11:11 AM Advanced Features Protecting Confidential Documents [Confidential] After printing is completed, the master remains on the Print Drum (Cylinder) and is ready for printing another set of copies. To protect confidential documents from unauthorized duplication, use the Confidential feature to discard the master after printing.

  • Page 46: Changing The Initial Settings [Custom Setting Mode]

    KZ30_UG.book Page 46 Monday, December 21, 2009 11:11 AM Advanced Features Changing the Initial Settings [Custom Setting Mode] You can change the initial settings that are restored when the power is turned on or when the key is pressed. The customised settings are effective until they are changed again.
  • Page 47 KZ30_UG.book Page 47 Monday, December 21, 2009 11:11 AM Advanced Features Parameter Selection Item Changeable Items Minimum Print Quantity 0 page 10 Specify the minimum number of pages to be pages pages pages pages pages printed from one master. If a number lower than the specified minimum number is entered, the master-making process is not executed.
  • Page 48 KZ30_UG.book Page 48 Monday, December 21, 2009 11:11 AM Advanced Features Parameter Selection Item Changeable Items Total Quantity Display Follow steps 1 and 2 of the “Changing Procedure”. The total number of pages printed with the p.49 machine is displayed. The total number of counter is shown on the Display.

  • Page 49: Changing Procedure

    KZ30_UG.book Page 49 Monday, December 21, 2009 11:11 AM Advanced Features Changing Procedure Press the key to turn on its indica- Note: tor. • To restore the initial settings for the Custom Setting mode, enter “99” and press the key, and then press the key.

  • Page 50: Replacing And Disposing Consumables

    Rinse your hand using a detergent immediately if stained with ink. Important!: • For the Ink Cartridge, it is recommended to use the products specified by RISO. • Before replacing the Ink Cartridge, turn the machine on. Press the key.
  • Page 51 KZ30_UG.book Page 51 Monday, December 21, 2009 11:11 AM Replacing and Disposing Consumables Pull the empty Ink Cartridge out of Important!: the holder. • Do not touch or give impact to the outlet surface of the new Ink Cartridge. Turn the Ink Cartridge to the left, and then pull it Do not remove the label attached to the outlet out.

  • Page 52: Replacing The Master Roll

    When the entire Master Roll is consumed, the Replace Master Roll Indicator lights. Replace with a new Master Roll. Important!: • For the Master Roll, it is recommended to use the products specified by RISO. • Before replacing the Master Roll, turn the machine on.
  • Page 53 KZ30_UG.book Page 53 Monday, December 21, 2009 11:11 AM Replacing and Disposing Consumables Close the Master Making Unit Cover. Replacing the Master Roll...

  • Page 54: Emptying The Master Disposal Box

    KZ30_UG.book Page 54 Monday, December 21, 2009 11:11 AM Replacing and Disposing Consumables Emptying the Master Disposal Box The used master is disposed in the Master Disposal Box. When the Master Disposal Box is filled with ejected masters, the Empty Disposal Box Indicator lights. Remove the ejected masters from the Master Disposal Box and discard them.
  • Page 55 KZ30_UG.book Page 55 Monday, December 21, 2009 11:11 AM Replacing and Disposing Consumables Press the Reset key. Close the Master Disposal Unit Cover. Emptying the Master Disposal Box...

  • Page 56: Disposal Of Used Consumables

    KZ30_UG.book Page 56 Monday, December 21, 2009 11:11 AM Replacing and Disposing Consumables Disposal of Used Consumables Dispose the depleted Ink Cartridges, Master Rolls and ejected masters according to the regulations in your local community. If required, separate the specific components using the following procedures to dispose them properly. Ink Cartridge Remove the label (metal included) at the arrow from the outlet surface of the Ink Cartridge, and then dispose them separately.
  • Page 57 KZ30_UG.book Page 57 Monday, December 21, 2009 11:11 AM Replacing and Disposing Consumables Disposal of Used Consumables...

  • Page 58: Maintenance

    • Be careful of the edge of metal parts, otherwise it may cause an injury. • Do not make any modifications to the machine or remove any parts. • Neither RISO nor its dealer is responsible for maintenance service performed by non-RISO-authorized personnel. Cleaning Thermal Print Head Clean the Thermal Print Head each time you replace the Master Roll.
  • Page 59 KZ30_UG.book Page 59 Monday, December 21, 2009 11:11 AM Maintenance Gently wipe the Thermal Print Head (golden section enclosed by green) in the back of the unit several times with a soft cloth or tissue. Caution: • Since the Thermal Print Head may be heated, do not touch it directly with your fingers. Important!: •...

  • Page 60: Scanner Glass And White Sheet Of The Df Unit

    KZ30_UG.book Page 60 Monday, December 21, 2009 11:11 AM Maintenance Scanner Glass and White Sheet of the DF Unit Grasp the Original Release Lever and open the Scanner Cover. Gently wipe and clean the Scanner Glass and the White Sheet with a soft cloth or tissue. Important!: •...

  • Page 61: Pressure Roller

    KZ30_UG.book Page 61 Monday, December 21, 2009 11:11 AM Maintenance Pressure Roller If the Pressure Roller holding printing paper to the Print Drum (Cylinder) is dirty, dirty lines may appear on the back of the printed material. If such a situation occurs, gently wipe the Pressure Roller with a soft cloth or tissue. Important!: •...

  • Page 62: The Exterior

    KZ30_UG.book Page 62 Monday, December 21, 2009 11:11 AM Maintenance Replace the Master Disposal Unit Caution: • Before cleaning the Pressure Roller, turn the machine off. Turn the Machine on. • When putting your hand into the unit, take care not to touch the paper separation hook or surrounding parts Return the Print Drum (Cylinder) to ).
  • Page 63 KZ30_UG.book Page 63 Monday, December 21, 2009 11:11 AM Maintenance Cleaning...

  • Page 64: Troubleshooting

    KZ30_UG.book Page 64 Monday, December 21, 2009 11:11 AM Troubleshooting Check & Error Display When an error occurs on the machine or when consumables or other sections are not yet ready, the Check & Error Display shows error locations and numbers indicating error types. For some errors, error numbers are shown on the Error Number Display (Print Quantity Display).
  • Page 65 KZ30_UG.book Page 65 Monday, December 21, 2009 11:11 AM Troubleshooting When the (JAM) Indicator blinks Check error locations and error numbers (on the Error Number Display) and take the following procedures: Error Cause Action Location No. A master has not Pull out the Print Drum (Cylinder).
  • Page 66 KZ30_UG.book Page 66 Monday, December 21, 2009 11:11 AM Troubleshooting Error Cause Action Location No. Master ejection has Pull out the Print Drum (Cylinder) and remove the master been failed. from the Print Drum (Cylinder) by hand. p.65 A-04 Set the Print Drum (Cylinder) again. Press the key.
  • Page 67 KZ30_UG.book Page 67 Monday, December 21, 2009 11:11 AM Troubleshooting Error Cause Action Location No. A master has not Open the Master Making Unit Cover, remove the master roll, been correctly set. and set the master correctly. p.52 A-01 Remove the master roll and set the master again. A-34 Close the Master Making Unit Cover.
  • Page 68 KZ30_UG.book Page 68 Monday, December 21, 2009 11:11 AM Troubleshooting Error Cause Action Location No. A paper jam has Remove the paper jammed on the Paper Receiving Tray occured on the section. Paper Receiving If you cannot remove the jammed paper, remove it after pulling Tray section.
  • Page 69 KZ30_UG.book Page 69 Monday, December 21, 2009 11:11 AM Troubleshooting When the (CHECK SETTINGS) Indicator blinks Check error locations and error numbers (on the Error Number Display) and take the following procedures. If an error number is not shown, press the key.
  • Page 70 KZ30_UG.book Page 70 Monday, December 21, 2009 11:11 AM Troubleshooting Location No. Error Cause Action A master roll has Set a master roll correctly and close the Master Making Unit not been set or it Cover. d-05 has been incorrectly p.52 set.
  • Page 71 KZ30_UG.book Page 71 Monday, December 21, 2009 11:11 AM Troubleshooting (LOW INK CARTRIDGE) Indicator When the indicator brinks: The remaining ink quantity is small (10% or less). Prepare a new Ink Cartridge. When the indicator lights: Because the entire ink has been consumed, set a new ink cartridge. p.50 (LOW MASTER ROLL) Indicator When the indicator brinks:...
  • Page 72 KZ30_UG.book Page 72 Monday, December 21, 2009 11:11 AM Troubleshooting Use the following procedure to enter necessary information. Enter a parameter using the Print Press the key to complete the set- Quantity keys. tings. The parameters that can be entered differ among If the next H No.

  • Page 73: Troubleshooting Tips

    KZ30_UG.book Page 73 Monday, December 21, 2009 11:11 AM Troubleshooting Troubleshooting Tips If any problems occur during printing, check the following points and take appropriate procedures before calling your authorized service representative. Problem Cause Action The machine does not start when the You may have pressed the power Try pressing the power switch again.
  • Page 74 KZ30_UG.book Page 74 Monday, December 21, 2009 11:11 AM Troubleshooting Problem Cause Action An error indication does not The consumables (ink, master roll) After inserting the Ink Cartridge until disappear even though have not been correctly set. it stops. Or set the Ink Cartridge consumables (ink, master roll) are again.
  • Page 75 KZ30_UG.book Page 75 Monday, December 21, 2009 11:11 AM Troubleshooting Problem Cause Action Dirt is found on printed copies. The Scanner Glass of the DF Unit is Wipe the Scanner Glass with a soft not clean. cloth or others. p.60 The trailing edge of printed copies The size of original is almost equal to Reduce the size of original and make...
  • Page 76 KZ30_UG.book Page 76 Monday, December 21, 2009 11:11 AM Troubleshooting Problem Cause Action The left and right print positions have The left and right print positions have Lower the Paper Feed Tray, adjust been shifted. not been adjusted for the center. the horizontal position, and then perform proof copy to check the position.
  • Page 77 KZ30_UG.book Page 77 Monday, December 21, 2009 11:11 AM Troubleshooting Problem Cause Action indicator lights even when a Lifted paper was ejected at the time Check the printed copies, and if the paper jam has not occured. of the second rotation of the Print top margin is less than 10 mm ( "), Drum (Cylinder).

  • Page 78: Appendixes

    KZ30_UG.book Page 78 Monday, December 21, 2009 11:11 AM Appendixes Specifications RISO KZ30 Feature Unit of mm Unit of inch Master-making/ High-speed digital master-making / fully automatic stencil printing printing methods Original Type Sheet Max. 257 mm × 364 mm "...
  • Page 79 *The pollution degree of the usage environment due to dirt and dust in the air. Degree "2" corresponds to a general indoor environment. Optional RISO PC Interface Card USB 2.0 Accessories Notes • As we are constantly improving our products, the machine may differ in some respects from the illustrations used in this manual.

  • Page 80: Index

    KZ30_UG.book Page 80 Monday, December 21, 2009 11:11 AM Index Index Symbols Error Type Indicator ..........64 * Key ............... 16 + Key ..............16 Feed Tray Lock Lever ..........14 × Key ..............16 Feed Tray Paper Guide ........14 , 20 Numerics Feed Tray Paper Guide Lock Lever ..
  • Page 81 KZ30_UG.book Page 81 Monday, December 21, 2009 11:11 AM Index Maximum Printing Areas ........12 Return 2-Up Printing Setting .........47 Minimum Print Quantity ......... 47 Return Print Counter Setting .........47 Return Program Print Setting ........47 Original Guide ............14 Original Mode ............46 Safety Guide - Handling and Operation ....7 Original Release Lever ........14 , 66 Safety Guide - Installation ........6...
  • Page 82 KZ30_UG.book Page 82 Monday, December 21, 2009 11:11 AM Index...

Table of Contents