Paper Orientation; Orientation Of Originals - Riso EZ Series User Manual

REG-LL_EN.book Page 43 Wednesday, September 14, 2011 12:03 PM

Paper orientation

Before printing, check the orientations of the original and print paper.

Orientation of originals

Always place originals in the orientation below.
Orientation of print paper
Always place print paper in the orientation below.
Note:
• You can specify the enlargement/reduction ratio by selecting the standard ratios or specify it in increments of 1%
using the Zoom function.
p.37
• Originals must have sufficient margins. Insufficient margins result in inappropriate page layout.
p.19
• A margin of the 5 mm (
• For two-original printing, you can separately select the following functions for each original.
Image Processing mode, Pencil, enlargement/reduction ratio, dot process/scanning level
3 / ") on the left edge of the set original is kept regardless of the enlargement/reduction ratio.
16
Setting up for Scanning Originals
Printing Originals Side-by-Side [2-Up Printing]
43