Clearing All User Management Function Settings - Riso EZ Series User Manual

REG-LL_EN.book Page 87 Wednesday, September 14, 2011 12:03 PM

Clearing all User Management Function Settings

The settings for all users including administrator is cleared.
The cleared items are as follows:
• Create User
• Management ON/OFF
• Suspend a User
• Total Count Limit (per user)
• Master Count Limit (per user)
Important!:
• Once the User Management function is cleared, it cannot be retrieved.
• The administrator must be registered in advance in the "Create User". ( p.78)
1
Press the
Its indicator turns on.
Important!:
• If the RISO Network Card (option) is installed,
you will not be able to enter the Custom Setting
mode for up to one minute after turning the
power on.
Note:
• To clear the setting, press the
turn off its indicator.
2
Enter the item number "95" and
press the [
The "Delete all User Management settings" mode
is activated.
key.
key again to
] key.
3
Press the key.
The clearance of the User Management function
settings is applied, and the normal mode is
restored.
Setting Up User Management
Advanced Features
87