Riso EZ Series User Manual page 120

REG-LL_EN.book Page 120 Wednesday, September 14, 2011 12:03 PM
Troubleshooting
Problem
The machine repeats the master-
making process for each original.
The key blinks.
" "appears on the Print
Quantity Display and the machine
does not start.
120
Troubleshooting Tips
Cause
"Collate Copies" or "Collate" was
selected for printer driver settings for
the received document data.
Received data is waiting for output.
When the machine is in use, the
power was turned off.
Action
Cancel the current print job and
resend the document data without
"Collate Copies" or "Collate"
selected for the printer driver
settings.
Press the key to output the data.
To delete data waiting for output,
press the key.
Press the key.