Riso EZ Series User Manual page 7

REG-LL_EN.book Page 7 Wednesday, September 14, 2011 12:03 PM
1)
Platen Cover
Opened and closed when placing the original.
2)
Sub Control Panel ( p.10)
3)
Glass Platen ( p.99)
Place an original face down.
4)
Main Control Panel ( p.8)
5)
Master Disposal Box ( p.93)
Holds discarded masters.
6)
Paper Feed Pressure Adjustment Lever
( p.20)
Adjusts the paper feed pressure according to
paper in use.
7)
Feed Tray Ascent/Descent Button ( p.21)
Lowers or raises the Paper Feed Tray when
changing or adding paper.
8)
Paper Feed Tray ( p.20)
9)
Feed Tray Paper Guides ( p.20)
Hold and guide paper.
Slide to fit to the sides of paper.
10)
Feed Tray Paper Guides Lock Lever
( p.20)
Lock the Feed Tray Paper Guides.
11)
Horizontal Print Position Adjustment Dial
( p.50)
Move the print position to the left or right.
12)
Auto Document Feeder (Option)
The Feeder can hold approximately 50 sheets of
the original sheets (80 g/m
the original face-down.
13)
ADF Original Receiving Tray
Scanned originals are ejected into this tray.
14)
ADF Original Release Lever ( p.106)
If an original is jammed, pull this lever to the right to
eject from the ADF unit.
15)
ADF Original Guides
Slide and adjusts to the width of the original to hold
together.
16)
Front Cover
17)
Ink Cartridge Cap Holder ( p.88)
18)
Master Making Unit ( p.90)
19)
Master Making Unit Cover ( p.90)
20)
Thermal Print Head
21)
Master Guide Flap ( p.90)
22)
Master Roll ( p.90)
23)
Master Roll Holder ( p.90)
24)
Ink Cartridge ( p.88)
25)
Print Drum (Cylinder) Handle ( p.96)
26)
Print Drum (Cylinder) ( p.96)
27)
28)
29)
30)
31)
32)
33)
34)
35)
36)
37)
2 (21-lb bond)). Place
38)
39)
Getting Acquainted
Counter
Counts the number of copies (total print counter)
and the number of made masters (master
counter).
Print Drum (Cylinder) Release Button
( p.96)
Unlocks the Print Drum (Cylinder) for removal.
Master Making Unit Handle ( p.90)
Master Making Unit Release Button
( p.90)
Unlocks the Master Making Unit for removal.
Stabilizer
Power Switch
Paper Jump Wing
Automatically adjusts to keep printed paper neatly
stacked.
Paper Jumping Wing Adjustment Dial
(For EZ3XX only) ( p.22)
Adjusts according to the finish and size of paper in
order to align printed paper.
Paper Arranger (For EZ3XX only) ( p.22)
Press to open for aligning printed paper.
Receiving Tray Paper Guides ( p.22)
Align printed paper neatly.
Slide according to the width of paper to be printed.
Paper Stopper ( p.22)
Stops paper printed and ejected into the Paper
Receiving Tray.
Slide according to the length of paper to be printed.
Paper Receiving Tray ( p.22)
AC inlet
Do not touch the POWER switch on the upper part
of the AC inlet (power cord connection). Changing
the POWER switch setting by mistake will cause
damage.
Function and Name of Each Part
7