Connection With A Computer (Option); Connection Method - Riso EZ Series User Manual

REG-LL_EN.book Page 14 Wednesday, September 14, 2011 12:03 PM
Before Starting to Use

Connection with a Computer (Option)

With an optional interface board (RISO PC Interface Card USB2.0) installed, you can directly send data from a con-
nected computer to the machine as an original for printing. Because digital data itself is used for making a master, the
finish of prints becomes outstanding.

Connection Method

One-to-one connection with a Windows PC
• Cable:
USB cable
Less than 3m (10 feet) Hi-Speed USB
Important!:
• Before making the USB connections, turn
on both the machine and computer, and
wait until the initial screen is displayed.
• The maximum allowable voltage for
USB connector input and output is 5 V.
• For the USB connections, use a
commercially available USB cable (that
conforms to the USB 2.0 standard).
Note:
• The RISO PC Interface Card USB2.0
(option) is required.
Network connections
• Cable:
Ethernet cable
Shielded cable that supports 10BASE-T
or 100BASE-TX
Important!:
• Before making the Ethernet connections,
turn off both the machine and computer.
Note:
• The RISO PC Interface Card USB2.0
and the RISO Network Card (both
options) are required.
• If the optional network interface card
"RISO Network Card" is installed, the
machine can be connected with a
Macintosh computer. For details, see
the User's Guide of RISO Network Card.
14
Connection with a Computer (Option)
USB port on the machine
USB
port
USB port on
your computer