Setting The Upper Limit Of The User's Usage - Riso EZ Series User Manual

REG-LL_EN.book Page 82 Wednesday, September 14, 2011 12:03 PM
Advanced Features

Setting the Upper Limit of the User's Usage

Set the Total Count Limit or Master Count Limit. Limits up to 9,999 can be set.
Important!:
• The administrator must be registered in advance from "Create User". ( p.78)
1
Press the
number.
The item numbers are as follows:
• Total Count Limit: 83
• Master Count Limit: 84
2
Press the [+] key.
The user number entry mode is activated.
3
Enter a user number using the Print
Quantity keys.
4
Press the [
The "Total Count Limit" mode or "Master Count
Limit" mode is displayed.
Note:
• If you enter an unregistered user number, the
alarm sounds and the user number entry mode
is restored. Enter a correct user number.
82
Setting Up User Management
key and enter the item
] key.
5
Enter the limit number using the
Print Quantity keys.
Note:
• Setting "0" for the upper-limit count enables lim-
itless printing.
6
Press the [ ] key.
The setting of the upper-limit count is applied, and
the next registered user number is displayed.
Repeat steps 3 through 6 to continue to set the
upper-limit count for other users.
Important!:
• If you press the key before pressing the
[ ] key, the setting is canceled and the nor-
mal mode is restored.
• If you press the key before pressing the
[ ] key, the setting is applied and the normal
mode is restored.
• An alarm sounds and an Error No. (F-04) is dis-
played if the Total Count (Master Count)
reaches the upper limit during printing. TPress
the key to release the error. To restart print-
ing, contact the administrator and clear the TC
or MC. p.83
Note:
• When the count has been set for the last regis-
tered user, the item number entry mode is
restored.