Adding Or Replacing Paper; Closing The Paper Feed Tray - Riso EZ Series User Manual

REG-LL_EN.book Page 21 Wednesday, September 14, 2011 12:03 PM

Adding or Replacing Paper

When you add paper or replace with paper of a different size at the time of printing, press the Feed Tray Ascent/
Descent Button to lower the Paper Feed Tray.
• The Paper Feed Tray is lowered while you press and hold the button, and when you release the button, the tray
stops at that position.
• When the tray runs out of paper or you remove all paper, the tray is automatically lowered to the bottom.
Important!:
• When changing to a different paper size, remember to readjust the Receiving Tray Paper Guides and Paper Stop-
per. p.22
• When changing to a different quality paper, remember to adjust the Paper Feed Pressure Adjustment Lever.

Closing the Paper Feed Tray

Before closing the Paper Feed Tray, remove the paper and widen the Feed Tray Paper Guides to the limits. Then
close the Paper Feed Tray.
Before Starting to Use
21
Preparing to Print