Adjusting The Print Density [Print Density Adjustment] (For Ez3Xx Only) - Riso EZ Series User Manual

REG-LL_EN.book Page 49 Wednesday, September 14, 2011 12:03 PM
Adjusting the Print Density
[Print Density Adjustment]
(For EZ3XX only)
You can select the print density from five levels.
Press the / keys under
the print density.
Each time you press the key, the print density is
changed by one step.
key: Decreases the print density.
key: Increases the print density.
:Lighter
:Darker
Important!:
• With the Ink Saving mode selected, you cannot
adjust the print density.
Note:
• The Custom Setting mode allows you to change the
initial setting for the print density.
p.66
• When the "ECO mode" is selected, the initial setting
for the print density is set to "1".
The print density can be adjusted even while the
ECO mode is set to "ON".
p.69
to adjust

Adjusting the Print Density [Print Density Adjustment] (For EZ3XX only)

Setting up for Printing
49