Reset All User Counters - Riso EZ Series User Manual

REG-LL_EN.book Page 84 Wednesday, September 14, 2011 12:03 PM
Advanced Features

Reset all User Counters

You can clear the count of both copy and master for all users in a single procedure.
Important!:
• After the counter is cleared, it cannot be recovered.
• The administrator must be registered in advance in the "Create User". ( p.78)
1
Press the
number "87".
2
Press the [
The "Reset all User Counters" mode is activated.
3
Press the
The clearance of the all users' counts is applied,
and the normal mode is restored.
84
Setting Up User Management
key and enter the item
] key.
key.