Ip Address Setting - Riso EZ Series User Manual

REG-LL_EN.book Page 75 Wednesday, September 14, 2011 12:03 PM

IP Address Setting

When connecting a computer, you need to set IP addresses on the machine. Make sure they are connected to the
network before attempting to set an IP address. If they have not been connected to a network with an Ethernet cable,
the IP address you enter will be cleared when you turn the power off.
Important!:
• For EZ2XX, set IP addresses on a connected computer.
1
Press the
cator.
Important!:
• If the RISO Network Card (option) is installed,
you will not be able to enter the Custom Setting
mode for up to one minute after turning the
power on.
Note:
• To clear the operation, press the
to turn off its indicator.
2
Enter an item number using the Print
Quantity keys.
The item number is 70.
key to turn on its indi-
key again
Customizing the Initial Settings [Custom Setting Mode]
3
Press the [ ] key.
4
Enter the first field using the Print
Quantity keys.
The entered number is shown on the Free Repro-
duction Size Display.
Note:
• The IP address numbers separated by dots are
called the first field, second field, and so on in
the order.
• The initial IP address settings for the machine is
"0.0.0.0". Setting the IP address of the machine
to "0.0.0.0" will turn on DHCP by default.
5
Press the [ ] key.
Continue to the next field. The Print Quantity Dis-
play changes.
Advanced Features
75