Suspend A User - Riso EZ Series User Manual

REG-LL_EN.book Page 81 Wednesday, September 14, 2011 12:03 PM

Suspend a user

You can enable or disable any user from using the machine.
A disabled user is not allowed to use the machine.
Important!:
• The administrator must be registered in advance from "Create User". ( p.78)
1
Press the
number "82".
2
Press the [
The user number entry mode is activated.
3
Enter a user number using the Print
Quantity keys.
4
Press the [
The "Disable" mode is activated.
Note:
• If you enter an unregistered user number or
administrator No. "0", the alarm sounds and the
user number entry mode is restored. Enter a
correct user number.
key and enter the item
] key.
] key.
5
Enter a parameter number using the
Print Quantity keys.
0 : ON
1 : OFF
6
Press the [ ] key.
The selected user is suspended, and the next reg-
istered user number is displayed.
Repeat steps 3 through 6 to continue to disable
other users.
Important!:
• If you press the key before pressing the
[ ] key, the setting is canceled and the nor-
mal mode is restored.
• If you press the key before pressing the
[ ] key, the setting is applied and the normal
mode is restored.
• An Error No.(F-39) is displayed when a dis-
abled user inputs the PIN code. Press the
key to release the error.
Note:
• When the last registered user has been sus-
pended, the item number entry mode is
restored.
Setting Up User Management
Advanced Features
81