Riso EZ Series User Manual page 31

REG-LL_EN.book Page 31 Wednesday, September 14, 2011 12:03 PM
8
Press the
After printing has been finished, return the set-
tings to the initial settings.
9
Remove the printed paper.
Pull and open the Receiving Tray Paper Guides,
and then remove the paper.
Note:
• For EZ2XX, lift the corrugators and pull the
guides open.
Tip:
• Depending on the operation status of the
machine, different Progressive Arrow sections
light or blink.
Progress Arrows
1) Master-making progress arrow
2) Master-making stop bar
3) Printing progress arrow
4) Printing stop bar
• Arrow 1 blinks and increments by one segment:
Master-making process in progress
• Arrow 3 blinks and increments by one segment:
Printing process in progress
key.
• The stop bar lights: Indicating Stop timing
• Both 1 and 2 light: Master-making process can
be executed.
• Both 3 and 4 light: Printing process can be exe-
cuted.
• Both 1 and 4: In the Auto-Process mode
• The machine halts and halfway arrow seg-
ments blink: A restoration instruction is being
waited.
Tip:
When "PASS" is displayed
If "PASS" flashes on the Print Quantity Display,
the User Management function is set by the
administrator. Input a PIN code.
1)
Enter your PIN code using the Print Quantity
keys.
The PIN code is shown as "-".
2)
Press the key.
Note:
• Consult your administrator for the PIN
code.
• If an incorrect PIN code is entered, the
alarm sounds and the PIN code input mode
is restored. Re-enter the correct PIN code.
• If a disabled user set in the Custom Setting
mode performs the procedures above, the
alarm sounds and an Error No. (F-39) is
displayed. Press the
error. p.81
After access has been verified, the Print Quantity
Display displays the Normal mode, and you can
start the printing operation.
Important!:
• After printing operation, press the
out. (If you do not log out, access privileges will
be inactivated with "Auto clear time").
To prevent the use by the unauthorized third
parties, we recommend you log out from the
machine.
Basic Operations
Basic Operations
key to release the
key to log
p.67
31