Before Starting To Use; Safety Guide - Installation; Installation - Riso EZ Series User Manual

REG-LL_EN.book Page 12 Wednesday, September 14, 2011 12:03 PM

Before Starting to Use

Safety Guide - Installation

This section describes the precautions to be observed when installing the machine. Read this section before install-
ing the machine.
Note:
• Your dealer (or authorized service representative) will help you to determine a proper location for the machine at
the time of delivery.

Installation

A
WARNING:
• Place the machine on the dedicated stand for this model or on a flat and stable surface (maximum of 10 mm (
inches) differential allowed). Injury might occur if the machine falls.
• Install the machine in a well-ventilated area. Failure to do so may result in serious health problems.
B
Caution:
• Install the machine near the electrical outlet to avoid using an extension cord between the machine and the elec-
trical outlet. If an extension cord is absolutely required, do not use one longer than 5 m (15 feet).
• Allow at least 10 cm (4 inches) or more of clearance behind the machine so that you can unplug the machine in
case of technical difficulties.
• Keep the machine away from dusty environments. Failure to do so may result in fire.
Important!:
• Avoid installing the machine in the locations listed below. Failure to observe this precaution may lead to machine
failure.
– Locations with exposure to direct sunlight, such as locations close to windows (Curtain all windows that might
expose the machine to direct sunlight)
– Locations that are subject to sudden changes in temperature
– Extremely hot and humid locations or cold and dry locations
– Heated locations
– Locations exposed to direct cold air, direct hot air, or direct radiant heat
– Locations of poor permeability and ventilation
12
Safety Guide - Installation
/
3
8