Riso EZ Series User Manual page 33

REG-LL_EN.book Page 33 Wednesday, September 14, 2011 12:03 PM
4
Send document data from the com-
puter.
While the machine is receiving data, the
cator blinks.
When data-reception is complete, printing starts
automatically at the printer driver settings.
Important!:
• You cannot make various settings including
image processing mode, by operating the
machine. Only the printer driver allows such
settings. For details, see the user's guide of the
printer driver.
Note:
• You can also use the printer driver to stop the
master-making or printing process at any point.
For details, see the User's Guide of the printer
driver.
• By checking which Progress Arrow segments
light or blink, you can identify at which status
the machine is stopped.
When the machine has been halted with
Progress Arrow segments blinking, it is waiting
for a start instruction. Press the
resume the process indicated by the blinking
arrow segments.
• If you press the
in use after the master-making process or when
you stop the machine during printing, the page
number currently being printed will be displayed
in Print Quantity Display.
• Data is printed in the order in which it was
received.
Tip:
When the computer sends document data, the
machine automatically receives it and starts the
master-making process. It is judged whether or
not the machine is in use, based on how much
time elapsed after any key had been pressed last
or printing had been finished.
This time period is called the "Reservation Period".
You can change the initial setting for the occupied
time in the Custom Setting mode.
indi-
p.31
key to
key when the machine is not
p.66
Tip:
• About the indicator
The status of the machine and data reception
can be understood from the lighting of the
indicator.
Lighting of Description
Indicator
Lit solidly The machine is ready to
receive data from the
computer.
Flashing The machine is receiving
rapidly data.
Flashing The machine is waiting to
slowly output data. (The received
data has been digitally
processed and is waiting for
the output command.) Or
the machine is making a
master of or printing the
digitally processed data.
Out The machine cannot
receive data.
Note:
• While the indicator is flashing, the data cur-
rently being received or which is in waiting for
output can be deleted by pressing the
Basic Operations
Basic Operations
key.
33