Riso EZ Series User Manual page 30

REG-LL_EN.book Page 30 Wednesday, September 14, 2011 12:03 PM
Basic Operations
When placing in the ADF unit (Option)
Use the ADF unit if you are printing multiple
originals in succession. Place originals face
down and then adjust the ADF Original Guides
to the width of the originals. Insert the originals
as far into the ADF unit as possible.
Important!:
• The sizes of originals to be placed in the
ADF unit must be 100 mm × 148 mm
(3 15 / "×5 27 /
16
nals, use the Glass Platen.
• Do not load inappropriate originals or origi-
nals of mixed sizes into the ADF.
This can causes paper jams or trouble.
p.18
Note:
• You can place up to about 50 sheets of orig-
inals in the ADF unit.
• The Custom Setting mode allows you to set
the Auto-Process to perform automatically
when an original is placed in the ADF unit.
p.66
• If using the Custom Setting mode you select
ON for Semi-Auto, the next master-making is
automatically started and then the machine will
stop when the ADF unit contains originals.
p.66
4
Make necessary settings.
Make various settings including image processing
mode selection.
p.34~ p.47
5
Press the
The original is scanned, and a master is made.
After a master has been made, a proof copy is
printed.
30
Basic Operations
") at least. For smaller origi-
32
key.
Check the proof copy result; e.g., print position
and density.
Note:
• You can change the settings for print position
and density. After changing the settings, press
, and then check the proof copy result.
p.48~ p.51
6
Enter the number of copies to be
printed, using the Print Quantity keys.
The specified number is shown on the Print Quan-
tity Display.
Note:
• If you enter an incorrect number, press the [C]
key, and then enter the correct number.
7
Press the key.
The specified number of copies will be printed.
Note:
• You can change the print speed using the Print
Speed Adjustment keys.
p.51
• If printing is stopped halfway, check the display.
p.102~ p.111