Printing With Data Generated By A Computer (Optional Kit Required) - Riso EZ Series User Manual

REG-LL_EN.book Page 32 Wednesday, September 14, 2011 12:03 PM
Basic Operations
Printing with Data Generated by a Computer
(Optional Kit Required)
1
Set the power switch to
turn the power on.
The power switch is located on the lower right side
of the machine.
: Power On
: Power Off
Important!:
• When the machine is in the Energy Saving
mode, the key is lighted. Press the
wake up the machine.
When "ECO" is displayed:
When the power switch is set to ON or the
machine is activated from the Sleep status,
"ECO" is displayed in the Print Quantity Dis-
play.
If the PIN code-input is needed, "PASS" is con-
tinuously displayed.
When "PASS" is displayed:
The PIN code-input is required when "PASS" is
flashing on the Print Quantity Display. For the
PIN code-input, see
32
Basic Operations
2
(ON) to
key to
3
p.31.
Check that the indicator is on.
If the indicator is off, press the
Important!:
• If the key is pressed while the
is flashing, the data currently being received or
which is waiting for output is deleted.
Check the paper and Drum (Cylin-
der) color (colour).
To change the paper or Drum (Cylinder) color
(colour), replace the paper on the Paper Feed
Tray or replace the Color Drum (Cylinder) as
needed.
key.
indicator