Sub Control Panel - Riso EZ Series User Manual

REG-LL_EN.book Page 10 Wednesday, September 14, 2011 12:03 PM
Getting Acquainted

Sub Control Panel

1)
Free Reproduction Size Display
(For EZ3XX only) ( p.38)
Shows the enlargement/reduction ratio specified
using the zoom function.
2)
Reproduction Size Selection Key ( p.37)
When selecting from among the standard repro-
duction sizes, press
The corresponding indicator lights to indicate the
current selection.
To restore 100%, press
3)
Zoom Key (For EZ3XX only) ( p.38)
Allows you to change the reproduction size in the
range from 50% to 200%.
After pressing , you can change the size in
increments of 1% using the selection keys.
Each time you press the key, the function is
switched on and off.
4)
Scanning Level Adjustment Keys/
Indicator ( p.39)
Select from five scanning levels.
The indicator above the keys shows the current
scanning level.
5)
Auto Scanning Level Adjustment Key/
Indicator ( p.39)
Automatically selects the optimum scanning level
for the current original.
Each time you press the key, the function is
switched on and off.
When activated, the indicator above the key lights.
6)
Ink Saving Key/Indicator ( p.47)
Makes the printer save ink.
Each time you press the key, the function is
switched on and off.
When activated, the indicator above the key lights.
10
Control Panels
/ to switch the selection.
.
7)
Image Processing Selection Key/Indicator
( p.34)
Each time you press the key, the Image Process-
ing mode is changed.
When the Line mode is selected,
the photo mode is selected,
Duo(text/photo) mode is selected, both
light.
8)
Pencil Key/Indicator ( p.35)
Select for an original written using a pencil.
Each time you press the key, the function is
switched on and off.
When activated, the indicator above the key lights.
9)
Dot Screen Selection Key/Indicator
(For EZ3XX only) ( p.36)
Adjusts shade in pictures when printing.
Each time you press the key, the selection is
(COARSE) →
switched among
and no shade. The corresponding indicator lights
depending on the selection.
10)
2-UP Key/Indicator ( p.41)
Allows side-by-side printing with a single paper.
Each time you press the key, the function is
switched on and off.
When activated, the indicator above the key lights.
11)
Book Key/Indicator ( p.40)
Use when placing a magazine or book as an origi-
nal for printing.
Each time you press the key, the function is
switched on and off.
When activated, the indicator above the key lights.
lights. When
lights. When the
and
(FINE) →