Saving Programs - Riso EZ Series User Manual

REG-LL_EN.book Page 59 Wednesday, September 14, 2011 12:03 PM

Saving Programs

Store frequently-used program settings for later retrieval and printing.
A total of 6 settings (Program A (Single Page) or Program B (Multi-Page Mode)) can be stored.
1
Set the program.
Enter the number of copies according to the steps
for Program A or Program B.
For details on the setting operations, refer to the
following steps.
Program A: steps 1 through 8 ( p.54~ p.55)
Program B: steps 1 through 7 ( p.57~ p.58)
2
Press the [
Store program settings.
3
Enter the program number using the
Print Quantity keys.
Select the number from 1 to 6.
] key.
Important!:
• When a program number that has already been
stored is selected, [a] or [b] is displayed on the
right-most digit.
• Since selecting a number that has already been
stored overwrites the previous settings, please
confirm the settings on the display before sav-
ing on the same number.
4
Press the [ ] key.
Program setting is stored and [Program A] or
[Program B] is displayed.
Important!:
• After storing a program, pressing the [P] key to
finish saving the program. By pressing the
key, you can start printing with a stored pro-
gram.
Automatic Sorting into Groups [Program]
Advanced Features
59