Riso EZ Series User Manual page 71

REG-LL_EN.book Page 71 Wednesday, September 14, 2011 12:03 PM
Item
Changeable Items
No.
70 Base IP address setting (For EZ3XX
only)
Set an IP address for the machine.
80 Create User
Up to 100 users (administrator
included) can be registered to use the
machine by performing the PIN code-
input.
p.78
81 Management ON/OFF*
Enables or disables the User
Management function.
p.80
82 Disable*
2
Turns machine access permission
ON/OFF.
p.81
83 Total Count Limit (per user)*
Sets the upper limit of TC for each
user.
p.82
84 Master Count Limit (per user)*
Sets the upper limit of MC for each
user.
p.82
85 Reset Total Counter (per user)*
Clears the TC for a specified user.
86 Reset Master Counter (per user)*
Clears the MC for a specified user.
87 Reset all User Counters*
Resets the TC and MC for all users in
a single procedure.
88 ID Counter Report Monthly Reminder
setting* 2
When counting regularly, the
reminder date can be set for the
counted date.
p.85
89 ID Counter Report Monthly Reminder
(stop)* 2
Press the [ ] key to disable the output
of counting results for the current
month, and "idcc" is not displayed until
the next month of the reminder date.
0
p.75
Administrator U-1 to U-99 (for user)
2 OFF ON
usable unusable
OFF 1 to 9999
2
2 OFF 1 to 9999
p.83
2
2 p.83
p.84
2
OFF 1 to 31
Note:
• To use the feature of ID Counter Report, the optional
RISO PC Interface Card USB2.0 is required.
p.85
Customizing the Initial Settings [Custom Setting Mode]
Advanced Features
Parameter Selection
1 2 3 4 5
71