How To Program Print - Riso EZ Series User Manual

REG-LL_EN.book Page 53 Wednesday, September 14, 2011 12:03 PM
Program B (Multi-Page Mode)
From a single original, up to 9999 copies can be made.
Each original can reproduce a pre-assigned number of sheets (up to 20 originals).

How to Program Print

There are two ways to print in sets using "Program" printing feature.
• Program, then print (without saving the settings)
• Retrieve a saved program, then print (when program is registered)
Note:
• The Job Separator (option) is useful for Programed Printing.
The Job Separator releases a piece of tape after each set or original document, thereby automatically separating
sets or groups. It eliminates the need to manually remove a stack of sheets or insert a marker between sets.
Remember to activate "Job Separation" in the "Custom Setting Mode" when printing with the Job Separator.
You must remove each stack from the Paper Receiving Tray, or insert a marker during the pause if not using the
Job Separator.
Advanced Features
Automatic Sorting into Groups [Program]
53