Power Connection - Riso EZ Series User Manual

REG-LL_EN.book Page 13 Wednesday, September 14, 2011 12:03 PM

Power connection

A
WARNING:
• Do not overload the electrical outlet or extension cord, nor damage the power cord by placing heavy objects on it
or pulling or bending it. This can result in fire or electric shock.
• Do not pull the power cord but hold the plug itself when unplugging it. This can damage the cord and result in fire
or electric shock.
• Do not plug or unplug the power cord if your hands are wet. This can result in electric shock.
B
Caution:
• Pull out the power cord plug from the electrical outlet more than once a year and clean the prongs of the plug and
their surroundings. Dust collected on these areas can result in fire.
Important!:
• Check the power cord and plug for poor connections. Plug the power cord securely into a nearby electrical outlet.
• Be sure to turn off the POWER switch when connecting or disconnecting a cable.
• Do not touch the POWER switch on the upper part of the AC inlet (power cord connection). Changing the POWER
switch setting by mistake will cause damage.
Before Starting to Use
Safety Guide - Installation
13