Verifying J-Series License Management; Displaying Installed Licenses; Displaying License Usage; Displaying Installed License Keys - Juniper J-series Services Router J4350 Getting Started Manual

J2320, J2350, J4350, and J6350 Services Router Getting Started Guide
Saving License Keys with the CLI
To save the licenses installed on the Services Router to a file with the CLI:
1.
2.
3.

Verifying J-series License Management

To verify J-series license management, perform the tasks explained in these sections:

Displaying Installed Licenses

Verify that the expected licenses are installed and active on the Services Router.
Purpose
From the CLI, enter the
Action
user@router> show system license
License usage:
The output shows a list of the license usage and a list of the licenses installed on the
Meaning
Services Router and when they expire. Verify the following information:
166
Verifying J-series License Management
Enter operational mode in the CLI.
To save the installed license keys to a file or URL, enter the following command:
request system license save filename | url
For example, the following command saves the installed license keys to a file
named :
license.config
request system license save ftp://user@host/license.conf
Go on to "Verifying J-series License Management" on page 166.
Displaying Installed Licenses on page 166
Displaying License Usage on page 167
Displaying Installed License Keys on page 167
show system license
Licenses
Feature name used
j-flow 0
bgp-reflection 0
Licenses installed:
License identifier: G03000002223
License version: 2
Valid for device: JN001875AB
Features:
bgp-reflection - Border Gateway Protocol route reflection
License identifier: G03000002225
License version: 2
Valid for device: JN001875AB
Features:
j-flow - J-FLOW traffic analysis (CFLOW reporting)
command.
Licenses Licenses Expiry
installed needed
1 0 permanent
1 0 permanent