Juniper J-series Services Router J4350 Getting Started Manual page 117

Table 50: CLI Editing Keystrokes
Task Category
Move the cursor.
Delete characters.
Insert recently deleted text.
Redraw the screen.
Display previous command lines.
Repeat keyboard sequences.
Command Completion
You do not always have to remember or type the full command or option name for
the CLI to recognize it. To display all possible command or option completions, type
the partial command followed immediately by a question mark (?).
Action
Move the cursor back one character.
Move the cursor back one word.
Move the cursor forward one character.
Move the cursor forward one word.
Move the cursor to the end of the command line.
Delete the character before the cursor.
Delete the character at the cursor.
Delete all characters from the cursor to the end of
the command line.
Delete all characters on the command line.
Delete the word before the cursor.
Delete the word after the cursor.
Insert the most recently deleted text at the cursor.
Redraw the current line.
Scroll backward through the list of recently executed
commands.
Scroll forward through the list of recently executed
commands.
Search the CLI history in reverse order for lines
matching the search string.
Search the CLI history by typing some text at the
prompt, followed by the keyboard sequence. The CLI
attempts to expand the text into the most recent
word in the history for which the text is a prefix.
Specify the number of times to execute a keyboard
sequence. Replace number with a number from 1
through 9, and replace sequence with a keyboard
sequence in this table.
Chapter 4: Services Router User Interface Overview
Keyboard Sequence
Ctrl-b
Esc b
Ctrl-f
Esc f
Ctrl-e
Ctrl-h, Delete, or Backspace
Ctrl-d
Ctrl-k
Ctrl-u or Ctrl-x
Ctrl-w or Esc Backspace
Esc d
Ctrl-y
Ctrl-l
Ctrl-p
Ctrl-n
Ctrl-r
Esc /
Esc number sequence
Using the Command-Line Interface
95