About This Guide; Objectives; Audience; How To Use This Guide - Juniper J-series Services Router J4350 Getting Started Manual

About This Guide

Objectives

Audience

This preface provides the following guidelines for using the J2320, J2350, J4350, and
J6350 Services Router Getting Started Guide:
Objectives on page xv
Audience on page xv
How to Use This Guide on page xvi
Document Conventions on page xvii
Related Juniper Networks Documentation on page xviii
Documentation Feedback on page xxi
Requesting Technical Support on page xxi
This guide contains an overview, basic instructions, and specifications for J2320,
J2350, J4350, and J6350 Services Routers. It explains how to prepare your site for
installation, unpack and install a Services Router and its components, power on the
router, install licenses, and establish basic connectivity.
J-series Services Router operations are controlled by the JUNOS software. You direct
the JUNOS software through either a Web browser or a command-line interface (CLI).
NOTE: This guide documents Release 9.2 of the JUNOS software. For additional
information about J-series Services Routers—either corrections to or omissions from
this guide—see the J-series Services Router Release Notes at
This guide is designed for anyone who installs and sets up a J-series Services Router
or prepares a site for Services Router installation. The guide is intended for the
following audiences:
Customers with technical knowledge of and experience with networks and the
Internet
Network administrators who install, configure, and manage Internet routers but
are unfamiliar with the JUNOS software
.
http://www.juniper.net
xv
Objectives