Tgm550 Rj-11 Connector Pinout For Analog Ports - Juniper J-series Services Router J4350 Getting Started Manual

J2320, J2350, J4350, and J6350 Services Router Getting Started Guide
NOTE: Two different RJ-45 cables and RJ-45 to DB-9 adapters are provided. Do not
use the RJ-45 cable and adapter for the Services Router console port to connect to
the TGM550 console port.
To connect the console port to an external management device, you need an RJ-45
to DB-9 serial port adapter, which is also supplied with the TGM550.
Table 93: TGM550 RJ-45 Console Connector Pinouts
TGM550 RJ-45
Pin
1
2
3
4
5
6
7
8

TGM550 RJ-11 Connector Pinout for Analog Ports

The two analog telephone ports and two analog trunk ports on the TGM550 use an
RJ-11 cable. Table 94 on page 240 describes the TGM550 RJ-11 connector pinout.
Table 94: TGM550 RJ-11 Connector Pinout
Pin
1
2
3
4
5
6
240
Connector Pinouts for Avaya VoIP Modules
Signal
For future use
TXD (TGM550 input)
RXD (TGM550 output)
CD
GND
DTR
RTS
CTS
Signal
No connection
No connection
Ring
Tip
No connection
No connection
Terminal DB-9 Pins
NC
3
2
4
5
1
8
7