Juniper J-series Services Router J4350 Getting Started Manual page 179

3.
4.
Table 65: Secure Access Quick Configuration Summary
Field Function
Certificates
Certificates Displays digital certificates required for SSL
access to the Services Router.
Allows you to add and delete SSL
certificates.
For information about how to generate an
SSL certificate, see "Generating SSL
Certificates" on page 155.
HTTP Web Access
Enable HTTP Access Enables HTTP access on interfaces.
Enable HTTP on All Enables HTTP access on all interfaces at
Interfaces one time.
HTTP-Enabled Specifies interfaces on which you want to
Interfaces enable HTTP access.
HTTPS Web Access
Enable HTTPS Access Enables HTTPS access on interfaces.
HTTPS Certificate Specifies SSL certificates to be used for
encryption.
This field is available only after you have
created an SSL certificate.
To verify that Web access is enabled correctly, connect to the router using one
of the following methods:
For HTTP access—In your Web browser, type
For HTTPS access—In your Web browser, type
.
address
For SSL JUNOScript access—A JUNOScript client such as JUNOScope is
required. For information about how to log in to JUNOScope, see the
JUNOScope Software User Guide.
To verify the secure Web access configuration, see "Verifying Secure Web
Access" on page 159.
Chapter 8: Configuring Secure Web Access
http://URL
https://URL
Your Action
To add a certificate:
1. Click Add. Opens the Add a Local Certificate page.
2. Type a name in the Certificate Name box—for
example, new .
3. Paste the generated certificate and RSA private
key in the Certificate box.
To delete a certificate, select it and click Delete.
To enable HTTP access, select the Enable HTTP access
check box.
To enable HTTP access on all interfaces, select the
Enable HTTP on All Interfaces check box.
Select and deselect interfaces by clicking the direction
arrows:
To enable HTTP access on an interface, add the
interface to the HTTP Interfaces list.
To disable HTTP access on an interface, add the
interface to the Logical Interfaces list.
To enable HTTPS access, select the Enable HTTPS
access check box.
To specify the HTTPS certificate, select a certificate
from the HTTPS Certificate list—for example, new.
Configuring Secure Web Access
or .
http://IP address
or https://IP
157