Juniper J-series Services Router J4350 Getting Started Manual page 28

J2320, J2350, J4350, and J6350 Services Router Getting Started Guide
The J4350 Services Router supports the following field-replaceable PIMs and Avaya
VoIP modules:
J6350 Services Router Overview
The J6350 Services Router is designed primarily for regional or central offices. It has
a chassis that is 2 U (rack units) in size with an optional redundant AC or DC power
supply, up to 2 GB of memory, and two universal serial bus (USB) ports for external
storage. The J6350 Services Router is a higher-performance system than the J4350
Services Router.
J6350 routers come standard with 1 GB of memory and can be upgraded to 2 GB of
memory. For instructions on adding memory, see "Replacing DRAM
Modules" on page 188.
Each J6350 chassis contains four built-in Gigabit Ethernet ports with link speeds of
10/100/1000 Mbps over a copper interface, and six slots for field-replaceable Physical
Interface Modules (PIMs) and Avaya VoIP modules. Four of the six slots (slots 2, 3,
5, and 6) support high-speed interfaces (ePIMs).
6
J6350 Services Router Overview
Gigabit Ethernet uPIM (1-port, 6-port, 8-port, and 16-port)
SFP Gigabit Ethernet ePIM (1 port)
Copper Gigabit Ethernet ePIM (1 port)
Dual-Port Serial PIM
Dual-Port E1 PIM
Dual-Port T1 PIM
Dual-Port Channelized T1/E1/ISDN PRI PIM
E3 PIM (1 port)
DS3 (T3) PIM (1 port)
Dual-Port Fast Ethernet PIM
4-port Fast Ethernet ePIM
4-port ISDN BRI S/T or U PIM
ADSL 2/2+ Annex A PIM (1 port)
ADSL 2/2+ Annex B PIM (1 port)
G.SHDSL PIM (2 ports)
TGM550 Telephony Gateway Module
TIM508 Analog Telephony Interface Module (8 ports)
TIM510 E1/T1 Telephony Interface Module (1 port)
TIM514 Analog Telephony Interface Module (4 ports)
TIM516 Analog Telephony Interface Module (16 ports)
TIM518 Analog Telephony Interface Module (16 ports)
TIM521 ISDN BRI Telephony Interface Module (4 ports)