Juniper J-series Services Router J4350 Getting Started Manual page 170

J2320, J2350, J4350, and J6350 Services Router Getting Started Guide
3.
4.
Table 63: Configuring Basic Settings
Task
Navigate to the System
level in the configuration
hierarchy.
Define the hostname of
the router.
Name the domain in
which the router is
located.
Allow SSH remote access.
Define root authentication
for access to the router.
NOTE: For readability, the
entire key is not shown.
Define the time zone the
router is located in.
148
Configuring Basic Settings with a Configuration Editor
If you are using the J-Web interface, click Commit to view a summary of your
changes, then click OK to commit the configuration. If you are using the CLI,
commit the configuration by entering the
To check the configuration, see Displaying Basic Connectivity
Configurations on page 150.
J-Web Configuration Editor
1. In the J-Web interface, select Configuration>View
and Edit> Edit Configuration.
2. Next to System, click Configure or Edit.
In the Host name box, type the hostname of the router—for
example, .
routera
In the Domain name box, type the domain name of the
router—for example,
lab.router.net
1. In the Nested configuration section, next to Services,
click Configure or Edit.
2. Next to Ssh, click Configure or Edit.
3. Click OK.
4. Click OK a second time to return to the System level
in the configuration editor hierarchy.
1. In the Nested configuration section, next to Root
authentication, click Configure or Edit.
2. Next to Ssh rsa, click Add New Entry.
3. In the Authorized key box, type the RSA password—for
example, ssh-rsa AAAAB3Nza...D9Y2gXF9ac==
root@routera.lab.router.net
4. Click OK.
5. Click OK a second time to return to the System level
in the configuration editor hierarchy.
In the Time zone list, select the time zone for your
router—for example, America/Los_Angeles.
command.
commit
CLI Configuration Editor
From the
enter
edit system
Set the hostname. For example:
set host-name routera
Set the domain name. For example:
.
set domain-name lab.router.net
Set remote access for SSH:
set services ssh
Set the root password. For
example:
set root-authentication ssh-rsa
"ssh-rsa
AAAAB3Nza...D9Y2gXF9ac==
root@routera.lab.router.net"
Set the time zone. For example:
set time-zone America/Los_Angeles
[edit] hierarchy level,