Juniper J-series Services Router J4350 Getting Started Manual page 69

Table 19: J2320 and J2350 Field-Replaceable PIM Summary
Supported Software Releases
PIM for This PIM
1-Port SFP, 6-Port SFP, JUNOS 8.4 and later
8-Port, and 16-Port
Gigabit Ethernet uPIMs
Dual-Port Serial PIM JUNOS 8.4 and later
Dual-Port T1 or E1 PIM JUNOS 8.4 and later
Dual-Port Channelized JUNOS 8.4 and later
T1/E1/ISDN PRI PIM
4-Port ISDN BRI PIM JUNOS 8.4 and later
ADSL PIM JUNOS 8.4 and later
G.SHDSL PIM JUNOS 8.4 and later
J4350 and J6350 Field-Replaceable PIM Summary
Table 20 on page 48 provides software release information, slot and port numbers,
and sample interface names for the field-replaceable PIMs supported on J4350, and
J6350 Services Routers.
CAUTION: Do not install a combination of PIMs in a single chassis that exceeds the
maximum power and heat capacity of the chassis. If J-series power management is
enabled, PIMs that exceed the maximum power and heat capacity remain offline
when the chassis is powered on.
To verify that the combination of PIMs to be installed in a chassis does not exceed
the power and heat capacities for the J4350 or J6350 router, see "Planning for Power
Management" on page 112.
Chapter 3: PIM and VoIP Module Overview
Port Numbering
Ports:
0
0 through 5
0 through 7
0 through 15
Ports—0 and 1
Ports—0 and 1
Ports—0 and 1
Ports—0, 1, 2, and 3
Port—0
Ports—0 and 1
Sample Interface Name
(type-pim/0/port)
ge-2/0/0
se-3/0/1
t1-0/0/1
or
e1-0/0/1
ct1-0/0/0
ce1-0/0/0
br-1/0/2
at-2/0/0
at-1/0/0
Field-Replaceable PIMs
47