Juniper J-series Services Router J4350 Getting Started Manual page 167

NOTE: After initial configuration is complete, the Services Router stops functioning
as a DHCP server. If you change the IP address of
device configured to use DHCP, you lose your DHCP lease and your connection to
the router through the J-Web interface. To reestablish a connection, either set the IP
address on the management device manually, or connect
management network and access the router another way—for example, through the
console port.
5.
Table 61: Set Up Quick Configuration Summary
Field Function
Identification
Host Name Defines the hostname of the router.
(required)
Domain Name Defines the network or subnetwork that the
machine belongs to.
Root Password Sets the root password that user "root" can
(required) use to log in to the router.
Verify Root Password Verifies the root password has been typed
(required) correctly.
Time
Time Zone Identifies the time zone that the router is
located in.
NTP Servers Specify an NTP server that the router can
reach to synchronize the system time.
To cancel your entries and return to the Quick Configuration page, click
Cancel.
To check the configuration, see Displaying Basic Connectivity
Configurations on page 150.
Configuring Basic Settings with J-Web Quick Configuration
Chapter 7: Establishing Basic Connectivity
and have the management
ge-0/0/0
ge-0/0/0
Your Action
Type the hostname.
Type the domain name.
Type a plain-text password that the system encrypts.
NOTE: After a root password has been defined, it is
required when you log in to the J-Web user interface
or the CLI.
Retype the password.
From the list, select the appropriate time zone.
To add an IP address, type it in the box to the left of
the Add button, then click Add.
To delete an IP address, click on it in the box above
the Add button, then click Delete.
to the
145