Juniper J-series Services Router J4350 Getting Started Manual page 162

J2320, J2350, J4350, and J6350 Services Router Getting Started Guide
8.
9.
10.
Figure 69: Connecting to the Console Port on J2320 and J2350 Routers
140
Connecting to a Services Router
Configure the port settings as follows:
Bits per second: 9600
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
Power on the router by pressing the power button on the front panel. Verify that
the LED on the front panel turns green.
POWER
The terminal emulation screen on your management device displays the boot
sequence. When the router has finished booting, a login prompt appears.
Log in as the user "root". No password is required at initial connection, but you
must assign a root password before committing any configuration settings.