Tim510 E1/T1 Telephony Interface Module - Juniper J-series Services Router J4350 Getting Started Manual

J2320, J2350, J4350, and J6350 Services Router Getting Started Guide
TIM508 LEDs indicate link status and activity. Table 39 on page 74 describes the
meaning of the LEDs.
Table 39: LEDs for TIM508
Label Color
Red
ALM
Yellow
ACT
For more information about the TIM508, see the Avaya manual Hardware Description
and Reference for Avaya Communication Manager.

TIM510 E1/T1 Telephony Interface Module

The TIM510 E1/T1 Telephony Interface Module (Figure 43 on page 74), also known
as the TIM510 E1/T1 media module, terminates an E1 or T1 trunk. The TIM510 T1/E1
media module has a built-in channel service unit (CSU) so an external CSU is not
necessary. The CSU is used for a T1 circuit only. Up to two TIM510s can be installed
in any of the slots on the Services Router.
Figure 43: TIM510 E1/T1 Telephony Interface Module
The TIM510 provides the following key features:
For pinouts of cable connectors for the TIM510, see "TIM510 RJ-45 Connector
Pinout" on page 241.
74
Avaya VoIP Modules
State
On steadily
Blinking
1 E1 or T1 trunk port with up to 30 channels on an E1 port and 24 channels on
a T1 port.
DS1-level support for a variety of E1 and T1 trunk types
Trunk signaling to support U.S. and international central office (CO) or tie trunks
Echo cancellation in either direction—incoming or outgoing
Description
Alarm. A TIM508 failure requires
monitoring or maintenance.
Active. A device connected to the
TIM508 is in use. This situation can
include a telephone that is off the
hook.