Replacing Air Filters On J4350 And J6350 Routers - Juniper J-series Services Router J4350 Getting Started Manual

J2320, J2350, J4350, and J6350 Services Router Getting Started Guide
Figure 102: Placing the Air Filter on the Air Filter Tray
6.
7.
Figure 103: Inserting the Air Filter Tray on J2350 Routers
8.
9.

Replacing Air Filters on J4350 and J6350 Routers

The front panel of J4350 and J6350 Services Routers contains an air intake grid with
a protective cover and a filter, as shown in Figure 104 on page 207.
206

Replacing Air Filters on J4350 and J6350 Routers

Press down on the filter until it is firmly seated against the bottom of the tray.
Hold the filter tray with the thumbscrew so that its sheet metal side faces the
power supply fan exhaust. The air filter tray is designed to prevent it from being
inserted incorrectly (see Figure 103 on page 206).
Slide the tray fully into the air filter opening.
Tighten the thumbscrew to the chassis.