Juniper J-series Services Router J4350 Getting Started Manual page 120

J2320, J2350, J4350, and J6350 Services Router Getting Started Guide
user@host> set cli ?
Possible completions:
Table 52 on page 98 shows how you can change the CLI environment features.
Table 52: Configuring the CLI Environment
Environment CLI Command
Feature
Command
set cli
completion
complete-on-space
(on | off)
Your working
set cli directory path8
directory
Minutes of idle time
set cli idle-time
minutes
Your session prompt
set cli prompt string
Restart-after-upgrade set cli
prompt
restart-on-upgrade
(on | off)
Number of CLI set cli screen-length
output line displayed
length
at once
98
Using the Command-Line Interface
complete-on-space Set whether typing space completes current word
directory Set working directory
idle-timeout Set maximum idle time before login session ends
prompt Set CLI command prompt string
restart-on-upgrade Set whether CLI prompts to restart after software upgrade
screen-length Set number of lines on screen
screen-width Set number of characters on a line
terminal Set terminal type
Default Setting
—Pressing Tab or Spacebar
on
completes a command.
/cf/var/home/remote
Your session never times out unless
your login class specifies a timeout.
>
user@host
CLI prompts you to restart the
Services Router after a software
upgrade.
Variable (depends on terminal type).
Options
Set to allow only Tab for
off
command completion.
Set on to re-enable Tab and
Spacebar for command
completion.
Replace with the directory you want
path
to enter when you log in to the Services
Router.
To enable the timeout feature,
replace with a value
timeout
between and .
1 100,000
To disable the timeout feature,
replace with .
timeout 0
Replace with the prompt you
string
want. If the prompt contains spaces or
special characters, enclose
string
quotation marks (" ").
Set off to disable the prompt for the
session.
Set to reenable the prompt.
on
To change the number of lines
displayed on the screen, replace
with a value between
length
100,000 .
To disable the display of a set
number of lines, replace
with . (This feature can be useful
0
when you are issuing CLI
commands from scripts.)
in
and
1
length