Gigabit Ethernet Epim Rj-45 Connector Pinout; Chassis Console Port Pinouts - Juniper J-series Services Router J4350 Getting Started Manual

J2320, J2350, J4350, and J6350 Services Router Getting Started Guide
Table 83: Gigabit Ethernet uPIM RJ-45 Connector Pinout (continued)
Pin
3
4
5
6
7
8

Gigabit Ethernet ePIM RJ-45 Connector Pinout

Table 84 on page 234 describes connector pinout information for 1-port Gigabit
Ethernet ePIM ports.

Chassis Console Port Pinouts

The console port on a J-series Services Router chassis has an RJ-45 connector.
Table 85 on page 235 provides RJ-45 chassis console connector pinout information.
An RJ-45 cable is supplied with the router.
To connect the console port to an external management device, you need an RJ-45
to DB-9 serial port adapter, which is also supplied with the router.
234
Gigabit Ethernet ePIM RJ-45 Connector Pinout
Signal Name
BI_DB+
BI_DC+
BI_DC-
BI_DB-
BI_DD+
BI_DD-
Table 84: Gigabit Ethernet ePIM RJ-45
Connector Pinouts
Pin Signal
1 MDI0+
2 MDI0-
3 MDI1+
4 MDI2+
5 MDI2-
6 MDI1-
7 MDI3+
8 MDI3-
Function
Bidirectional pair +B
Bidirectional pair +C
Bidirectional pair -C
Bidirectional pair -B
Bidirectional pair +D
Bidirectional pair -D