Saving License Keys With The Cli; Verifying J-Series License Management; Displaying Installed Licenses - Juniper J2300 Getting Started Manual

3.

Saving License Keys with the CLI

To save the licenses installed on the Services Router to a file with the CLI:
1.
2.
3.

Verifying J-series License Management

To verify J-series license management, perform these tasks:

Displaying Installed Licenses

Verify that the expected licenses are installed and active on the Services Router.
Purpose
From the CLI, enter the
Action
Sample Output
user@router> show system license
License usage:
Licenses installed:
Go on to "Verifying J-series License Management" on page 157.
Enter operational mode in the CLI.
To save the installed license keys to a file or URL, enter the following command:
request system license save filename | url
For example, the following command saves the installed license keys to a file
named :
license.config
request system license save ftp://user@host/license.conf
Go on to "Verifying J-series License Management" on page 157.
Displaying Installed Licenses on page 157
Displaying License Usage on page 158
Displaying Installed License Keys on page 159
show system license
Licenses
Feature name used
j-flow
bgp-reflection
dlsw
License identifier: G03000002223
State: valid
License version: 2
Valid for device: JN001875AB
Features:
bgp-reflection - Border Gateway Protocol route reflection
Installing and Managing J-series Licenses
command.
Licenses Licenses
installed needed
0 1
0 1
0 1
Verifying J-series License Management
0
0
0
157