Table of Contents
Advertisement
Configuration: Network
Your telephone system has 4 Ethernet ports, which are interlinked by a switch, and
an additional port for the connection of the ADSL modem.
The telephone system provides the following network features:
•
a web server for the configuration of the telephone system via web browser
•
a router for Internet access
•
a router for wireless LAN connection
•
a DHCP server for the automatic assignment of IP addresses
Network settings
Settings
IP address, subnet mask and MAC address
In order to be able to address the telephone system within the network, an IP ad-
dress must be assigned to your telephone system and the telephone system must be
assigned to a network via the subnet mask. The IP address 192.168.1.100 and the
subnet mask 255.255.255.0 are factory pre-set.
This menu is used to change the IP address and subnet mask according to your
needs. You also will receive additional information on the network name and the MAC
address of the telephone system from this menu.
If you wish to set up a new network, you do not have to change the settings here. If
you wish to integrate the telephone system into an existing network, you have to
adapt the IP address and subnet mask to your network. In this case, the DHCP server
should be disabled.
Note: The telephone system will automatically be restarted after changes of these
settings.
Telephone system identifier
Here you can enter a name for your telephone system in order to facilitate its locating
within the network.
Configuration: Network
58
Advertisement
Table of Contents
