Table of Contents
Advertisement
•
LED off => idle state
action: Pressing this key activates the hands-free mode and provides an external
line (dialling tone after targeted exchange connection). If the handset is lifted, the
hands-free mode is not automatically activated.
•
LED blinks => an incoming call for this MSN/DDI
action: Pressing the key activates the hands-free mode and the incoming call is
picked up. The hands-free mode is not automatically activated when the handset
is lifted.
Please note:
This assignment allows a CO-line access for a special MSN/DDI
even if the access to the external line is normally blocked for this
subscriber (menu item „exchange authorisation for outgoing calls:
no").
Internal target
The subscriber's phone number (internal destination number) has to be entered here.
The LED indicates the corresponding status:
•
LED on => the subscriber is holding a telephone call
action: Pressing the key activates the hands-free mode and the other sub-
scriber's call is picked up (condition: a call pick-up is allowed according to the
other subscriber's settings, pick-up parameter: answering machine). The hands-
free mode is not automatically activated when the handset is lifted.
•
LED off => idle state
action: Pressing the key activates the hands-free mode and the other subscriber
is called. The hands-free mode is not automatically be activated when the hand-
set is lifted.
•
LED blinks => an incoming call for this subscriber
action: Pressing the key activates the hands-free mode and the incoming call is
picked up (pick-up parameter: on). The hands-free mode is not automatically ac-
tivated when the handset is lifted.
Note: If the same subscriber receives a second call during an active conversation
(LED on), this status is indicated by means of a blinking LED. That means
that the second incoming call (waiting call) can be picked up.
Speed dialling key
It is possible to enter any target number here. This target number will be dialled when
the functional key is pressed.
Call forwarding unconditional
The target number (internal or external) has to be entered here. By pressing the func-
tional key, a direct call forwarding to the indicated subscriber is activated for your
Configuration: Subscriber
50
Advertisement
Table of Contents
