Table of Contents
Advertisement
First steps
This telephone system has been designed as a plug & play device, i.e. after connect-
ing the terminals, connecting the telephone system to the telephone network and
switching on the power supply, the system is ready for use.
Please note that there is a difference between the configuration of a telephone sys-
tem e.g. by the administrator and a configuration by individual subscribers. The ad-
ministrator assigns phone numbers to the subscribers. With this phone number or
with the subscriber's name and a password, the subscriber can enter his personal
settings via a browser (e.g. programming a call forwarding). The administrator also
takes care of the extensions, at which a call will be signalled, and which external
MSNs will be available.
Your telephone system is supplied with the following factory pre-set parameters (The
following list is not complete and includes only the settings relevant for an initial func-
tional test):
•
The external S
access (DSS1).
•
S
ports 2 and 3 are configured via hardware jumpers on the internal S
0
subscribers (MSNs) 20 – 21 respectively 30 – 31 are pre-set (only tiptel 3022 of-
fice).
•
The internal S
scribers (MSNs) 40 - 41 are pre-set.
•
The analogue extensions 1 – 8 are assigned to the subscribers 50 - 57.
•
All subscribers have international exchange authorisation.
•
Standard exchange connection with the digit
•
Charges are only displayed on ISDN terminals, not on analogue terminals.
•
The pre-set PIN is 0000.
•
The pre-set Ethernet address is 192.168.1.100.
•
The pre-set subnet mask is 255.255.255.0.
•
The DHCP start address is 192.168.1.10.
•
The user name / the password for the web-based configuration is admin/admin.
In order to ensure a complete functionality of the ISDN terminals, an MSN must be
assigned to them. For details on assigning MSNs to the ISDN terminals, please
consult the User's Manuals of your ISDN terminals.
is configured for Euro ISDN point-to-multipoint and point-to-point
0
is configured for Euro ISDN point-to-multipoint access. The sub-
0
First steps
.
15
. The
0
Advertisement
Table of Contents
