Configuration: Extensions; Analogue Extensions In General; Settings; Analogue Extensions Per Port - TIPTEL 3022 office Installation Manual

Isdn telephone system

Hide thumbs Also See for 3022 office:

Table of Contents

Configuration: Extensions

Kind of CLIP signalling at the analogue extensions

This menu is used to define, whether the phone number shall be signalled at the ana-

logue extensions via FSK (frequency shift keying) or DTMF (dual tone multiple fre-

quency). The relevant information can be taken from the User's Manual of your ana-

logue telephones.

Rhythm of ringing signal for internal calls

This menu is used to define, whether there shall be different ringing rhythms at ana-

logue extensions for external and internal calls.

Settings

Charging signal

This menu is used to set whether charges shall be signalled at your analogue port:

"signalling on / off".

Call waiting signal allowed

This menu is used to allow or block the call waiting signal.

If a fax machine or a modem is connected, the call waiting signal should be dis-

abled in order to avoid the interruption of connections.

Calling line identification presentation (phone number transmission)

This menu is used to allow or block the transmission of phone numbers.

Table of Contents

3011 office