Configuration: Subscriber
Dialling control on/off
This menu is used to enable the global setting "dialling control via blocked numbers"
for the subscriber.
Enabling of charge account
It is possible to enable a charge account for each subscriber. As soon as the sub-
scriber exceeds his / her charge limit, no further external calls (except emergency
calls) can be initiated. Active calls will not be interrupted after exceeding the charge
limit. A negative credit is indicated instead.
Manual Internet access
You can individually determine for each subscriber whether a manuel Internet access
should be possible via the Web-configuration.
on => The subscriber is authorized to manually access the Internet.
off => The subscriber is not authorized to manually access the Internet.
Assignment table: extensions
Here you can define at which extensions the selected subscriber shall be signalled.
Simply select the desired extensions in the displayed table.
Assignment table: incoming external calls
Here you can set via which external MSNs or DDIs the subscriber can be called.
Simply select the desired MSNs in the displayed table.
Requirement: Entry of the external MSNs.
Assignment table: external going MSN
Here you have the option to choose between "random" and "according to allocation
table". If you select "random", a going call will be routed via any random S
port. If you
0
select "according to allocation table", a going call will be routed via the defined S
0
port with the selected MSN.
It is also possible to select several S
ports. In this case, the occupation is effected
0
according to the defined order. First, the dialling procedure is initiated via the S
0
marked "1". If this S
is busy, the dialling procedure is initiated via the S
marked "2".
0
0
The possible settings depend on the number of external S
ports.
0
45