Table of Contents
Advertisement
Configuration: ISDN access
Settings
Your telephone system tiptel 3022 office provides the 4 S
phone system tiptel 3011 office provides the 2 S
an internal S
port, it will be listed here but cannot be modified. Ports 2 and 3 may be
0
used internal or external at choice via jumpers, while port 1 can only be operated as
external S
.
0
For the external S
0,
access. If you choose the point-to-multipoint access, you can additionally select
"layer 2 always active".
At a point-to-point access you additionally have to enter the base number. The exten-
sion numbers for the point-to-multipoint access have to be entered in the menu "entry
of MSN/DDI".
Note: You have to restart the telephone system manually after changing from
point-to-point to point-to-multipoint access or vice versa.
Type / Status
For the external S
0
cess.
Layer 2 always active (only point-to-multipoint access)
If you have chosen a point-to-multipoint access you can additionally determine, if the
connection to the switchboard shall always remain active (layer 2 always active).
Thus, the connection can be monitored via the switchboard. With a point-to-point ac-
cess, layer 2 is automatically always active.
Basic number (only point-to-point access)
With a point-to-point access, you additionally have to enter the base number. The ex-
tension numbers for a point-to-point access have to be entered in the menu "entry of
MSN/DDI".
Configuration: External ISDN access
you can choose between a point-to-point or point-to-multipoint
you can choose between point-to-point or point-to-multipoint ac-
ports 1 to 4 while the tele-
0
ports 1 and 4. As port 4 is always
0
39
Advertisement
Table of Contents
