Configuration; Configuration Via Lan - TIPTEL 3022 office Installation Manual

Configuration

Configuration via LAN

•
Start your web browser (Internet Explorer 5.0 or higher, Netscape Navigator or
similar).
•
The factory pre-set IP address of the tiptel 3022 office / tiptel 3011 office is
192.168.1.100.
•
Enter this IP address in the address bar of your browser and confirm with "enter".
•
Now you are requested to enter user name and password
(pre-set user name: "admin" / pre-set password: "admin").
•
Confirm your entry with "OK".
Alternatively, you can also access the configuration menu via the network identifier of
the tiptel 3022 office / tiptel 3011 office. This is factory pre-set to "tiptel.office".
This network identifier can be used instead of the IP address.
Note: You should immediately set a new user name and a new password for
safety reasons.
Configuration
29