Main features
The telephone system tiptel 3022 office / 3011 office provides many features which
can be adapted to the individual requirements. Some of these features may be en-
abled / disabled via individual settings at the extensions.
•
1 S
external for Euro ISDN point-to-multipoint or point-to-point access (DSS1)
0
•
2 x S
internal/external variable (only tiptel 3022 office)
0
(S
internal as point-to-multipoint access, Euro ISDN protocol DSS1)
0
(S
external for point-to-point or point-to-multipoint access, DSS1)
0
•
1 S
internal as point-to-multipoint access, Euro ISDN protocol DSS1
0
•
8 a/b ports, symmetrical
•
CLIP signal (calling line identification presentation) available at a/b, e.g. display
of caller's phone number on the display of your telephone
•
Charge pulse at a/b
•
Status LEDs
•
DSL router
•
ISDN router
•
4 port LAN switch 10/100 Mbps
•
RS 232 interface
•
Configuration via Internet browser
•
New firmware may be downloaded from the Internet and uploaded to your tele-
phone system via your PC for adaptation to future requirements
•
Remote configuration via the Internet or telephone line
•
Dial-in server (ISDN) for accessing the network via ISDN
•
Security passwords for protection against sabotage
Terminal units
It is possible to connect analogue telephones, ISDN telephones, answering ma-
chines, fax machines, and PCs to the telephone system tiptel 3022 office / 3011 of-
fice. Range and use of features depend on the terminal equipment used. Please also
consult the User's Manuals of the terminal equipment.
Only approved terminal units complying with the standard TBR 21 should be con-
nected to the telephone system.
First steps
13