Table of Contents
Advertisement
Please note:
The language is not determined when selecting the country code.
The corresponding setting is realised via the configuration (setting
of language) of your browser.
Charge per pulse
The transmission of charging information at the analogue ports is made by
charge pulses. Each charge pulse corresponds to a certain amount of
money, which can be set here.
If you receive the charging information from the exchange office in the form of units,
you have to enter the value of a unit here. Thus, the value of a charge unit is ana-
logue to the value of a charge pulse.
Note: Charge pulses are only transmitted if the feature AOCD has been enabled.
Single-person operation (Busy on Busy)
This menu is used to enable the single-person operation mode. This is useful if you
are alone and unable to answer several calls at the same time. If single-person opera-
tion mode is enabled, each external caller hears the busy tone as soon as one exten-
sion is busy.
Call holding external
This menu is used to set whether calls shall be placed on hold externally within the
public exchange (call holding external enabled) or internally within your telephone
system (for each call placed on hold internally, one free B-channel must be avail-
able).
If a call is placed on hold within your telephone system, the caller hears music-on-
hold. During call holding external the caller hears the individual announcement of
your network provider.
Requirement:
Call holding external is only possible at a point-to-multipoint ac-
cess.
Note: For the transfer of an external call to another external subscriber the setting
"call holding external - off" is required.
Music-on-Hold
It is possible to place external or internal calls on hold within your telephone system.
In this case, the caller on hold hears the internal music-on-hold. This feature can be
enabled / disabled in this menu.
No artist royalty fees have to paid for internal music-on-hold.
Configuration: Global Settings
34
Advertisement
Table of Contents
