Table of Contents
Advertisement
System telephone
Your telephone system supports the system telephone tiptel 82 system. An individual
MSN has to be entered in each system telephone for identification purpose. If several
MSNs are entered, only the first MSN will be used for identification. The configuration
of the system functions is realised via the Web configuration of your telephone sys-
tem. In the first place, determine the requested system telephone by means of the
option MSN/subscriber. Afterwards, system functions can be assigned to the func-
tional keys. The allocation of the functional keys cannot be modified by the user of
the telephone. Exception: select the option „free macro key" for those functional keys
which should be programmed according to the user's individual requirements.
Status CO-line access
For this function, the LED indicates whether a CO-line is available for an external call.
It will be taken into account which external S0 connections have been assigned to
the subscriber. It is thus possible that no external line is available though not all ex-
ternal S0 connections are busy.
•
LED on => no CO line available
action: no
•
LED off => an external line is available
action: Pressing the key activates the handsfree-mode and provides a CO line
(external dialling tone after standard exchange connection). If the handset has
been picked up, the hands-free mode is not automatically activated.
•
LED blinks => exchange authorisaton has been withdrawn
action: no
Please note:
Do not assign this function to any key if the CO-line access for this
subscriber has been blocked (menu item „exchange authorisation
for outgoing calls": no). Otherwise, this key permanently blinks.
For example, the exchange authorisation can be withdrawn be-
cause the subscriber concerned has exceeded the limit of his
charge account.
CO-line access with specific MSN/DDI (line key)
It is determined here via which MSN/DDI of your telephone system an outgoing ex-
ternal call should be created. As the MSNs/DDIs are assigned to certain external S0
connections, you determine at the same time which port should be used for the tele-
phone call. The LED indicates the corresponding status:
•
LED on => this MSN/DDI is being used for the telephone call
action: no
Configuration: Subscriber
49
Advertisement
Table of Contents
