Port Associations Output Fields - Alcatel-Lucent 7210 SAS E OS Configuration Manual

Port Show Commands
Port Associations Output — The following table describes port associations output fields.

Port Associations Output Fields

Sample Output
A:ALA-1# show port 1/1/6 associations
==============================================================================
Interface Table
==============================================================================
Router/ServiceId
------------------------------------------------------------------------------
Router: Base
Router: Base
------------------------------------------------------------------------------
Interfaces
==============================================================================
A;ALA-1#
A1 Detailed Output — The following table describes A1 detailed output fields.
Page 150
Label
Svc ID
Name
Encap Value
Label
Description
Interface
Oper Speed
Link-level
Config Speed
Admin State
Oper Duplex
Oper State
Config Duplex
Physical Link
The service identifier.
The name of the IP interface.
The dot1q or qinq encapsulation value on the port for this IP interface
Name
if1000
if2000
A text description of the port.
The port ID displayed in the slot/mda/port format.
The operating speed of the interface.
Ethernet — the port is configured as Ethernet.
The configured speed of the interface.
up — the port is administratively up.
down — the port is administratively down.
The operating duplex mode of the interface.
up — the port is operationally up.
down — the port is operationally down.
full — the link is configured to full duplex mode.
half — the link is configured to half duplex mode.
Yes — a physical link is present.
No — a physical link is not present.
7210 SAS E Interface Configuration Guide
Description
Encap Val
1000
2000
Description