Alcatel-Lucent 7210 SAS E OS Configuration Manual page 148

Port Show Commands
Page 148
Label
Oversize Pckts
Collisions
Drop Events
CRC Align Errors
Fragments
Jabbers
Octets
Packets
Unicast packets
input/output
Multicast pack-
ets input/output
The total number of packets received that were longer than 1518 octets
(excluding framing bits, but including FCS octets) but were otherwise
well formed.
The best estimate of the total number of collisions on this Ethernet seg-
ment.
The total number of times that packets were detected as being dropped
due to a lack of resources (not necessarily the total number of packets
dropped).
The total number of packets received that were between 64 and 1518
octets (excluding framing bits but including FCS octets) that had either
a bad Frame Check Sequence (FCS) with an integral number of octets
(FCS Error) or a bad FCS with a non-integral number of octets (Align-
ment Error).
The total number of packets received that were shorter than 64 octets
(excluding framing bits but including FCS octets) that had either a bad
Frame Check Sequence (FCS) with an integral number of octets (FCS
Error) or a bad FCS with a non-integral number of octets (Alignment
Error).
The total number of packets received that were longer than 1518 octets
(excluding framing bits but including FCS octets) that had either a bad
Frame Check Sequence (FCS) with an integral number of octets (FCS
Error) or a bad FCS with a non-integral number of octets (Alignment
Error).
Total number of octets received.
The number of packets received, broken down by size Port Statistics.
The number of packets, delivered by this sub-layer to a higher (sub-)
layer, which were not addressed to a multicast or broadcast address at
this sub-layer. The total number of packets that higher-level protocols
requested be transmitted, and which were not addressed to a multicast
or broadcast address at this sub-layer, including those that were dis-
carded or not sent.
The number of packets, delivered by this sub-layer to a higher (sub-)
layer, which were not addressed to a unicast or broadcast address at
this sub-layer. The total number of packets that higher-level protocols
requested be transmitted, and which were not addressed to a unicast or
broadcast address at this sub-layer,including those that were discarded
or not sent.
7210 SAS E Interface Configuration Guide
Description